Seattle, WA: 206-521-5676 Olympia, WA: 360-236-8748 Portland/Salem, OR: 503-768-9742 Info@SolutionsNW.com
Stay Safe in the Industrial Warehouse Plant: Warehouse Slip and Fall

Stay Safe in the Industrial Warehouse Plant: Warehouse Slip and Fall

Produced by: Solutions Northwest, Inc. (Ergonomics Experts serving Kent, Renton, Seattle, and Tacoma Washington, California, and Oregon.

Warehouse Ergonomics, Avoid Slip and Fall Injury

5.5 injuries occur per 100 full-time warehouse and storage workers every year. – U.S. Bureau of Labor Statistics 

Slip and fall injuries are too common

It is important to be mindful of your surroundings when you work in an industrial plant or warehouse. According to the 2013 Bureau of Labor Statistics report, 1 in 4 accidents in the warehousing and storage industry occur when employees fall, trip, or slip.

A few common reasons workers may fall, slip, or trip in the workplace are:

  • Accumulations of dust or powder on floor
  • Uneven walking surfaces
  • Electrical cords and hoses positioned across walkways
  • Loose flooring, carpeting or mats
  • Missing or uneven floor tiles and bricks
  • Damaged or irregular steps with no handrails
  • Shoes with wet, muddy, greasy or oily soles
  • General clutter
  • Open desk or file cabinet drawers
  • Damaged ladder steps
  • Ramps with no skid-resistant surfaces

3 Quick Tips to Avoid Slips and Falls in the Warehouse

  1. Establish good housekeeping habitsEmployees should be encouraged to keep their area clean and free of clutter. It may help to assign cleaning as a daily task for specific employees to ensure that cleaning becomes a daily routine.Keeping the plant clean and organized will not only prevent injury, but it will also help keep the work efficient.

 

  1. Organize your surroundings

    Be mindful of any equipment that requires wires or hoses to be in a walkway, this equipment should be covered with protectors to prevent tripping.All walkways and docks over four feet should have railing. And be sure to keep all areas well lit – if it is difficult to see, then it is more likely for a worker not to see potential hazards in their way.

 

  1. Reduce slippery or wet surfaces outside of the floor

    While cleaning the warehouse floor seems like a given, it is important to control other indoor and outdoor surfaces. For example, wet or rainy weather from outside can be tracked inside, therefore it is important to keep parking lots and sidewalks clean.Provide moisture-absorbent mats and display “Wet Floor” signs as needed. Don’t forget about kitchen areas, be sure to use proper area rugs or mats.


In conclusion

Stay vigilant when it comes to avoiding slip and fall injuries in the warehouse. Don’t hesitate to consult with an ergonomics expert to assess your warehouse to keep your employee’s workplace safe.

For more ergonomics tips, visit SolutionsNW.com and subscribe to our blog.

SolutionsNW.com  provides work place and ergonomics tips from Solutions Northwest Inc., an ergonomics assessment provider located in Seattle, Kent, Renton, Tacoma, Washington State, Northern California, Oregon, Seattle, Olympia, Tacoma, and Portland.

 

Contact our Experts

Ergonomics Tips: Prevent These 3 Common Warehouse Injuries

Ergonomics Tips: Prevent These 3 Common Warehouse Injuries

Post By: Celeste McLaughlin, Ergonomics Manager
Produced by: Solutions Northwest, Inc. (Ergonomics Experts serving Washington, Oregon, and California)
Prevent Common Warehouse Injuries in the Workplace
5.5 injuries occur per 100 full-time warehouse and storage workers every year.U.S. Bureau of Labor Statistics 

The tasks that the warehousing and storage industry are primarily engaged in are: “labeling, breaking bulk, inventory control and management, light assembly, order entry and fulfillment, packaging, pick and pack, price marking and ticketing, and transportation arrangement.” U.S. BLS

The warehouse and storage sector may have a high variety of tasks, but they have one very common factor:  “a high rate of strain and sprain injury. Compared to other industries, musculoskeletal injuries occurred twice as frequently.  These injuries most often affected the back, upper extremities and knees, and most likely were caused by exposure to material handling or other ergonomic-related risk factors including high applied force, awkward postures, short cycle times or long work durations without adequate breaks.”

Here are 3 of the most common risk factors and some ways to reduce injury:

1. Slip and fall injuries. According to the 2013 Bureau of Labor Statistics report, 1 in 4 accidents in the warehousing and storage industry occur when employees fall, trip, or slip. Here a few common reasons workers may fall, slip, or trip in the workplace while walking:  water or chemical spills, accumulations of dust or powder on floor, electrical cords and hoses positioned across walkways, general clutter on walking surfaces.

To avoid these common injuries, employers should keep the floors clean and free of clutter. Some equipment requires wires or hoses to be in a walkway, if this is the case, they should be covered with protectors to prevent tripping. All walkways and docks over four feet should have railing. And be sure to keep all areas well lit – if it is difficult to see, then it is more likely for a worker not to see potential hazards in their way.

2. Exertion and repetitive stress injuries. A lot of warehouse and storage work will require exertion and repetition. Poor body posture and improper lifting are common reasons for injury, according to the Occupational Safety and Health Administration (OSHA). Some common injuries are: musculoskeletal disorders, back, and knee injuries.

To avoid injury, ensure that employees are educated about proper lifting procedures and that the workplace has proper ergonomic design.

3. Equipment-related injuries. Often, warehouse and storage companies will purchase equipment to reduce lifting injuries. However, the equipment purchased to avoid injuries can lead to new safety risks. According to OSHA “forklift accidents cause about 95,000 injuries every year. Other equipment that pose a safety risk would be: conveyor belts, hand trucks, power tools and compactors.”

First and foremost, proper training and procedure is a great way to prevent workplace injury. Additionally, proper gear (goggles, helmets, reflective vests) can help protect from hazards. Ensuring that your workers receive proper certifications to operate heavy equipment (as well as keeping these up to date) is also a great way to prevent equipment-related injury.

Consider contacting an ergonomics expert to assess your work environment. As experts in the field, we strive to make sure all workplaces remain a safe and healthy environment for all.

Be sure to share these tips with your workers or employees. For more guidance on all work related health and safety issues, visit SolutionsNW.com or Contact Us for more detailed information.

Don’t forget to subscribe to our blog for more ergonomics tips from Solutions Northwest Inc., ergonomics consultants located in Washington State, Northern California, Oregon, Seattle, Olympia, Tacoma, and Portland.

Contact our Experts

Pin It on Pinterest